How To Use (Read Me First)

The Tag Libraries provide interactive documentation for this Tag Set that you can access through Web browsers. Separate Tag Libraries have been set up for each of the specific Tag Sets (Journal Archiving, Journal Publishing, and Article Authoring). Within each Tag Library, you navigate to specific information in many ways, such as:
You can use the Tag Library as a reference to look up XML tags and how to use them, to browse around and familiarize yourself with this Tag Set, to see examples of correct or recommended usage, and even to find guidance for how to implement software to handle documents that are marked up using this Tag Set.
At the top level of each Tag Set’s Tag Library (shown in the colored navigation bar to your left) there are several main sections:

Moving Around in the Tag Library

As with most Web documents, you can click on links to travel from one topic to another and use your browser’s “Back” button to backtrack through previously-visited pages. In addition, there are three navigation aids on every page:
  1. At the top left is a horizontal Tab Bar with links to the primary topics in the Tag Library (“Elements”, “Attributes”, “Parameter Entities”, and “Index”) as well as a link to the Tag Library’s main page (“Home”).
    ../graphics/blue-top-nav-bar.png
    Clicking on a topic tab takes the user to the introduction for that section.
  2. To the left is a colored vertical Navigation Bar with links to all parts of the Tag Library, including the Tag Library’s introduction, the primary sections discussed earlier, and specialized sections such as those on “Common Tagging Practice” and “Supporting Documentation Home”.
    ../graphics/blue-side-nav-bar.png
  3. At the very bottom of each page, in the far right corner is a “Back to Top” link.

Navigation Bar

The vertical Navigation Bar is used to move within sections as well as between sections.
  • If a section has subsections, a triangle (../graphics/blue-side-triangle.png) appears next to the section’s title.
  • Clicking on the triangle changes it to a triangle pointing down (../graphics/blue-down-triangle.png) and opens a list of sub-topics within that main section.
  • Clicking on a sub-topic goes directly to the corresponding discussion.
Elements: For example, clicking on the triangle to the left of the word “Elements” will show a list of all the XML element types such as <p> and <table> that are defined in this Tag Set.
../graphics/blue-down-triangle-elem.png
(For those not familiar with the tag name of an element, hovering over the tag name will reveal its more English-like, descriptive equivalent, for example, hovering over the “<p>” will show “Paragraph”
../graphics/blue-p-para-pop.png
.) Because there are many elements, you will likely have to scroll down to find a particular one (using the scroll-bar immediately to the right of the Navigation Bar, not the main scroll-bar for the entire browser window).
Clicking on the name of an element (in pointy brackets) will take you to a page for that element, with detailed information about its use, content, and permissible contexts.
Attributes: Similarly, clicking on the triangle before the “Attributes” section will bring up a list of all the available attributes.
../graphics/blue-down-triangle-attr.png
An attribute that is available on many elements will list each element, and explain any differences in usage. This section also provides key attribute details such as whether the attribute is required or optional, and lists of suggested values.

Collapsing the Vertical Navigation Bar

Some users, especially those consulting the Tag Library with small devices, want to use the full width of their displays for the body of the entry. Click the “«” to collapse the vertical navigation bar, and the “»” to re-open it.

Tag Library Sections

In all Tag Library sections except the “Document Hierarchy Diagrams”, when the text mentions a specific element, attribute, or parameter entity, the name is linked to the page that describes that item. This makes it easy to access related information.
The following Tag Library sections are generally useful; the remaining sections are written for implementors and people modifying or installing the Tag Set.
Document Hierarchy Diagrams section illustrates portions of the Tag Set’s structure that are nested or that have complex structures. This information can also be gleaned on each Element page under the heading “Description”. The diagrams use some special symbols that are described below.
Common Tagging Practice section contains descriptions of more general issues on how to use this Tag Set. For example, affiliations and keywords involve numerous elements, attributes, and general design choices. These are discussed in special sections, rather than under some particular related element(s). These sections are important for learning to use this Tag Set well, and links to them are provided from elements and attributes to which they are especially relevant.
Element Context Table has an alphabetical list of available elements. For each one, it shows all the elements that can directly contain it. This is a great way to find out whether a certain element can be used in a certain context. This information can also be gleaned on each Element page under the heading “This element may be contained in”.
Index section works like the index at the back of many books. You can use it to find where a given item or topic is discussed. The index lists elements, attributes, and discussion topics under many related names and descriptions, so if you don’t know the exact tag name to use for something, try looking in the index under various related words, and you will most likely find a reference to the applicable tag or attribute.

The Element Page

These pages start out with the XML name of the element they describe, followed by a more English-like, descriptive name and a definition. Many elements also have remarks that give further details, discussions of best practice, notes that may be helpful to users that need to convert data into this Tag Set from other sources, and cross-references.
There is also a description of exactly what elements are allowed within the element and in what combinations. This information is provided in three forms:
  • “Content Model” — the “raw” content model in XML syntax. This may contain parameters entities, of the form “%name;”, which often stand in for commonly-used lists of elements. Users not familiar with formal XML (DTD) syntax will likely prefer the “Expanded Content Model” or the “Description”.
  • “Expanded Content Model” — the content model with all parameter entities expanded to their ultimate values. This list directly shows all the elements that the described element can contain, and in what combination.
  • “Description” — a text description of the allowable content, which is much longer than the content models, but should be readily understandable without having to learn the details of content models and their punctuation. These descriptions often refer to categories of elements, such as “the address elements”. These categories correspond to parameter entities that are shown in the “raw” content model, and are reused in many places.
For many elements, a “Document Hierarchy Diagram” provides a fourth descriptive form. This form is described below.
Most element pages include specific examples that show how the element can be used, including any relevant context. These examples have all been tested and validated; however, portions are often left out or replaced by “...” to keep examples manageable. In addition, the most relevant parts of examples are highlighted so they are easy to find.
For more details see the Introduction to Elements section.

The Attribute Page

Attribute pages are organized very much like element pages. However, because an attribute cannot have sub-elements, the description instead tells which elements can use the attribute, what kind of attribute it is, and what the permitted and default values are (the default value is used when the attribute is not specified at all on a particular instance of an element).
Some common kinds of attributes are:
An XML identifier (ID)
This kind of attribute must have a value that is an XML NAME, which can consist of XML name characters (alphabetical characters, digits, period, underscore, and hyphen), and cannot start with a digit. Every ID attribute value in a single document must be unique and provides a way to link or refer to its element (for example, using the <xref> element). ID attributes are generally named @id.
An identifier (IDREF)
This kind of attribute must have a value that is the same as some ID value in the same document. IDREFs appear on elements (such as <xref>) that refer to other elements. IDREF attributes are generally named @rid. Some @rid attributes are of type IDREFS, which is simply a space-separated list of IDREF values.
Text, numbers, or special characters (CDATA)
These attributes can take any string value at all. If the attribute value is surrounded by single quotes, then single quotes cannot appear inside; if the attribute value is surrounded by double quotes, then double quotes cannot appear inside. In either case, the prohibited character can instead be represented by an XML character reference such as “&apos;”. XML elements cannot be placed within attribute values.
“xxx-type” attributes
There are many attributes whose names end in “-type”. They are generally CDATA attributes as described above. They are typically assigned tokens as values, containing no spaces. Typically if there are spaces in the value, they separate multiple independent tokens, all of which apply. For example, some element might be both of type “important” and “normative”, and be given type “important normative”. In many cases, the Tag Library gives suggested values for such attributes. Unless specifically stated otherwise, those values are not the only values permitted.
Finally, there may be a “Restrictions” section that specifies if the attribute must always be specified or is optional.
For more details see the Introduction to Attributes section.

The Document Hierarchy Diagrams

These diagrams illustrate portions of the hierarchical (nested) structure of this Tag Set. Each diagram has one element “root” and may illustrate the structures of several additional elements. For each element illustrated, its name appears in a box on the left, with lines to boxes for each of its possible child-elements, which are in a column on the right.
Boxes for child elements can have names and/or symbols within. If the box has merely “...”, it means that the actual content has been omitted, to save space or improve clarity. If it has merely an icon of a page with lines, it stands for text content rather than an actual element.
If a box has an element name, then symbols at the left end of the box indicate whether that element is required and/or repeatable. These symbols are called “occurrence indicators”:
?
means that the item is optional (zero or one)
*
means that the item may occur any number of times (zero or more)
+
means that the item must occur at least once, but may occur any number of times (one or more)
a thick vertical bar on the left of the box
means that the item is the “document element”: the top-most element, such as <article> or <book> and is therefore required.
(no symbol)
means that the item must occur exactly once
The symbols at the right end of a box have these meanings:
˜ (a tilde)
means that the item may take one or more attributes
a thick vertical bar on the right of the box
means that the item is expanded elsewhere (For example, if an element is permitted in multiple places within a certain parent element, there is little point in repeating its information many times.)
The lines that connect a box to boxes on its right may either be squared-off or direct (angled) lines. The former indicates that the boxes to the right must occur in the order shown; the latter indicates that any order is permitted.
For more details and examples see the Document Hierarchy Diagrams section.